EMD SD45 |
 |
| Data Sheet Information Compiled by: Jean-Denis Bachand |
| Revised: 12 Feb. 2014 |
Artwork by: Jean-Denis Bachand |
| - |
| Engine Builder: EMDI |
Engine: 645E3 20 cylinder |
| Bore & Stroke |
9.02" X 10" |
| RPM (Maximum / Minimum) |
904 / 318 |
| Main Generator: AR10 |
Horsepower: 3600 |
| Gear Ratio: 62:15 |
Speed: 65 mph |
| Trucks: 6-Wheel |
Configuration: C-C |
| Traction Motor Blowers: Electrical Drive (4) |
Model: D77 |
| Weight: 368,000 lbs |
Traction Motors: Six |
| Tractive Effort (starting) 92,000 lbs @25% |
Tractive Effort (continuous): 82,100 lbs @ 11 mph |
| Multiple Unit Capability: Yes |
Dynamic Braking: Yes |
| Auxilary Generator: Delco A8102 |
Alternator: GMD14 |
| Air Brake: Westinghouse |
Model: 26L |
| Compressor: Gardner-Denver |
Model: WBO |
| Quantity Built: 136
|
Dates: 5/1972 to 9/1974 |
| - |
- |
| Exterior Dimensions
| SD45 |
| Total Length |
65'-09.5" |
| Wheel Diameter |
40" |
| Truck Wheel Base |
13'-07" |
| Height to Top Engine Hood |
15'-07.2" |
| Height to Top Cab |
14'-08.7" |
| Cab Width |
10'-00" |
| Top of Walkway |
?? |
| Engine Hood Width |
7'-00" |
| Distance between Truck Centers |
40'-00" |
| Locomotive Wheel Base |
53'-07" |
| Minimum Turning Radious |
30 degrees |
| -
| - |
| Fuel Oil: 3200
| Lubricating Oil: 294 |
| Engine Cooling Water: 288
| Sand Capacity: 56 cu. ft. |
| Options: |
| - |
Reference Sources:
- Diesel Locomtoives, Vol.2, by Bob Hayden
- Illustrated Treasury of GM Locomotives, by James W. Kerr
- Diesel Locomotives, The First 50 Years by Louis A. Marre
- The Second Diesel Spotter's Guide, by Jerry A. Pinkepank
- "Early Diesel and Electric Locomotives," Rail Heritage Publications
- Diesel & Electric Locomotive Specificiations, 1981 by F.K. Hudson
- Train Shed Cyclopedia, Vol. 20, 58, 60, 64, 80
|